Standard Padel Court Dimensions and Specifications: A B2B Buying Guide

If I am sourcing a standard padel court for a club, hotel, sports center, or property development, I start with the playing area: a regulation padel court measures 20 meters long by 10 meters wide, measured on the inside of the enclosure. The standard layout includes a fully enclosed court, transparent end and side panels, metal mesh sections, access doors, and a net dividing the playing surface. For most commercial projects, the dimensions are only the starting point; foundation design, glass configuration, drainage, lighting, installation, and local safety requirements also affect the final specification.

Check now

Who This Standard Padel Court Guide Is For

This guide is intended for B2B buyers comparing padel court suppliers, including sports facility developers, leisure operators, hotel groups, schools, distributors, and construction contractors. It is useful when preparing a quotation, checking whether a site can accommodate a court, or comparing different enclosure and material options. I focus on practical specifications that influence procurement, installation, operation, and long-term maintenance.

A standard court can be supplied as a complete package or as a combination of structural components, glass panels, mesh, doors, lighting, artificial turf, and accessories. Before requesting a price, I recommend separating mandatory requirements from optional upgrades. This makes supplier quotations easier to compare and reduces the risk of purchasing an incomplete system.

What Is a Standard Padel Court?

A standard padel court is an enclosed sports structure designed for doubles padel play. The regulation playing rectangle is 20 m × 10 m, while the enclosure combines solid transparent panels and metallic mesh to keep the ball within the playing zone. The court normally has a central net, service lines, corner posts, access openings, and a prepared surface suitable for outdoor or indoor use.

The court enclosure is not simply a decorative frame. It must provide consistent geometry, stable panel support, controlled ball rebound, safe player access, and resistance to the intended environment. A buyer should therefore review the complete technical drawing rather than relying on the phrase “standard padel court” alone.

Core Dimensions and Specifications

Playing Area and Enclosure Height

The standard internal playing area is 20 meters in length and 10 meters in width. The end walls and the first sections of the side walls are commonly enclosed with transparent panels, while mesh sections continue above or along the remaining enclosure. A typical enclosure reaches approximately 3 meters in some areas and up to 4 meters at the ends or higher sections, depending on the design and applicable rules.

For planning purposes, I do not treat 20 m × 10 m as the complete construction footprint. Structural posts, access doors, lighting columns, drainage channels, maintenance clearance, and circulation space can increase the required area. The exact allowance should be confirmed from the supplier’s installation drawing before civil works begin.

Glass Panels and Metal Structure

Tempered safety glass is widely used for the transparent sections because it provides visibility and a consistent rebound surface. Commercial specifications often use glass around 10–12 mm thick, but the suitable thickness depends on panel size, support spacing, edge treatment, design loading, and local requirements. I ask suppliers to state the glass thickness, panel dimensions, treatment process, edge finishing, fixing method, and replacement procedure in writing.

The supporting structure is usually manufactured from steel or another suitable metal system with corrosion protection. Common options include galvanized components, powder-coated finishes, or multi-stage protective treatments selected for the installation environment. For coastal, humid, or chemically aggressive locations, the coating system and maintenance plan deserve particular attention because corrosion risk varies by site conditions.

Mesh, Posts, Doors, and Net System

Welded or woven metal mesh is used in sections where visibility, ventilation, and ball containment are required. Mesh aperture, wire diameter, panel rigidity, and connection details can influence safety and durability, so I request these details instead of accepting only a general material description. The door system should open smoothly, avoid sharp projections, and remain compatible with player circulation and emergency access requirements.

The central net divides the court into two halves and must be installed at the specified height and tension for the selected rule set. Posts, brackets, anchors, and net fittings should be compatible with the court frame. A supplier should also clarify whether the quotation includes the net, doors, fixings, lighting supports, artificial turf, and all installation hardware.

Standard Padel Court Specification Overview

The values above are procurement references rather than a substitute for local regulations or the final engineered drawing. Different court models may use different frame profiles, glass layouts, mesh systems, lighting positions, and access configurations. I always compare equivalent specifications before judging whether one quotation is cheaper.

Rayjun Product Page

Material and Design Options

Indoor, Outdoor, and Panoramic Configurations

Indoor courts usually have greater protection from rain, wind, ultraviolet exposure, and temperature changes. Outdoor courts require more attention to drainage, foundation anchors, corrosion protection, wind exposure, and electrical safety. Panoramic designs may reduce visible corner framing, but they can require more precise glass support and may carry different installation and replacement costs.

Buyers should select the design according to the operating environment rather than appearance alone. A visually open court may suit a premium club or hotel, while a conventional framed court may offer a more practical balance between price, serviceability, and component replacement. The right option depends on land conditions, customer positioning, expected utilization, and maintenance resources.

How to Select the Right Standard Padel Court

Step 1: Confirm the Site and Civil Works

First, I verify the available site dimensions, finished ground level, access route, drainage plan, power supply, and foundation requirements. The surface must be sufficiently level and stable for accurate court installation. If the court is placed on a roof, terrace, or existing slab, a qualified local professional should confirm load capacity and anchoring feasibility.

Step 2: Define the Operating Environment

Next, I identify whether the project is indoor, outdoor, coastal, high-wind, humid, or exposed to heavy public use. This information affects metal protection, glass support, drainage details, lighting, and maintenance planning. It also helps the supplier recommend a suitable finish rather than offering a generic package.

Step 3: Compare Complete Technical Packages

I compare drawings, bills of materials, panel specifications, mesh details, door quantities, net systems, lighting scope, packaging, and installation instructions. A low initial price may exclude foundations, electrical work, delivery, cranes, or commissioning. For an accurate landed cost, I request a line-by-line quotation that identifies included and excluded items.

Step 4: Review Commercial Terms

Lead time depends on customization, production capacity, material availability, inspection requirements, and shipping arrangements. Minimum order quantity also varies by supplier and product configuration, so I ask for the MOQ and production schedule before finalizing the project plan. For multiple courts, I additionally review batch consistency, spare parts availability, and the supplier’s ability to repeat the same specification.

Common Buyer Mistakes

One common mistake is measuring only the 20 m × 10 m playing rectangle and forgetting circulation, equipment, lighting, and maintenance access. Another is comparing glass thickness without checking panel dimensions, support spacing, edge protection, and anchoring. Buyers also sometimes select a coating or drainage solution without considering the local climate.

A further risk is treating lighting as an afterthought. The number and position of luminaires, power requirements, glare control, and cable routing can affect both user experience and construction cost. I recommend coordinating the court supplier, civil contractor, and electrical contractor before the foundation and slab details are approved.

Supplier Evaluation Checklist

• Request a dimensioned general arrangement drawing and foundation plan.
• Confirm that the internal playing area is 20 m × 10 m.
• Review glass thickness, tempering, edge finishing, and replacement process.
• Ask for steel grade or profile information and the corrosion-protection method.
• Confirm mesh aperture, wire or panel construction, and connection details.
• Check whether doors, net, turf, lighting, anchors, and installation hardware are included.
• Request packing details, spare-part recommendations, warranty terms, and installation guidance.
• Verify the supplier’s experience with export packaging and project coordination without relying on unsupported claims.

How Rayjun Supports B2B Padel Court Projects

At Rayjun, I approach padel court sourcing as a metal building materials project rather than as a single visual product. Our support can focus on the metal enclosure, structural components, protective finishes, glass and mesh coordination, packaging, and specification matching according to the buyer’s project requirements. We can review drawings and help identify the information needed for a more complete quotation.

For distributors and contractors, practical communication is especially important. I recommend confirming the target market, court environment, quantity, delivery destination, preferred finish, and installation scope at the quotation stage. This allows Rayjun to prepare a clearer supply proposal while keeping customization, MOQ, lead time, and logistics assumptions visible.

Key Takeaways for Buyers

• A standard padel court has an internal playing area of 20 m × 10 m.
• The complete project footprint is larger because of structure, access, lighting, drainage, and circulation requirements.
• Typical commercial glass specifications may be around 10–12 mm tempered glass, but the final choice must match the design and local requirements.
• Outdoor projects require careful review of corrosion protection, wind exposure, drainage, anchoring, and electrical installation.
• The best quotation is not necessarily the lowest price; it is the one with the clearest scope, drawings, materials, exclusions, and support terms.

Conclusion: What Should You Order?

If your project requires a standard padel court, begin with a 20 m × 10 m internal playing area and then confirm the enclosure height, glass system, mesh, metal protection, foundation, drainage, lighting, and access requirements. Do not finalize the order from a catalog image or a single headline specification. Instead, use a dimensioned drawing and a complete bill of materials to compare suppliers on an equivalent basis.

My recommended next step is to prepare your site dimensions, intended application, quantity, destination, environmental conditions, and required delivery date. Send these details to Rayjun for a project-focused quotation and specification review. With the right information confirmed early, B2B buyers can reduce sourcing ambiguity and select a padel court solution that is easier to install, operate, and maintain.

Want more information on standard padel court? Feel free to contact us.